The Forney 75585 Full-Size Air Pressure Regulator, 3/8" FNPT provides precise, dependable air pressure control for compressed-air systems, pneumatic tools, and workshop equipment. Designed to maintain consistent downstream air pressure, this full-size regulator features an adjustable output range of 5 to 150 PSI, making it suitable for a wide variety of air compressor and pneumatic applications.
Engineered with secondary aspiration and a balanced valve design, the Forney 75585 delivers quick response to changing air demands while helping maintain accurate pressure regulation. Its rolling diaphragm construction promotes extended service life and dependable operation, even in applications where air pressure requirements fluctuate.
With an 80 CFM rated airflow at 215 PSI, a maximum inlet pressure of 250 PSIG, and standard 3/8-inch female National Pipe Taper (FNPT) connections, this regulator is designed for use with air compressors up to 10 horsepower. The removable, non-rising adjustment knob also allows panel mounting and helps provide tamper resistance in installations where consistent pressure settings are important.
Whether used in a professional workshop, automotive garage, agricultural repair shop, or general-purpose compressed-air system, the Forney 75585 offers convenient pressure adjustment, responsive regulation, and easy serviceability.
Country of Origin: Not confirmed
The Forney 75585 features an adjustable outlet pressure range from 5 to 150 PSI, allowing operators to select the appropriate air pressure for compatible tools and equipment.
Proper pressure regulation helps prevent excessive air pressure from reaching downstream equipment while allowing tools to operate at their recommended settings.
Always verify the pressure requirements of connected equipment before adjusting the regulator.
The regulator has a listed airflow capacity of 80 cubic feet per minute (CFM) at 215 PSI.
This rating indicates its ability to handle substantial airflow under the manufacturer's specified conditions.
Actual airflow performance depends on inlet pressure, regulated outlet pressure, pressure differential, piping restrictions, and the compressed-air system's configuration.
The regulator incorporates secondary aspiration, a design feature that helps improve response to changing downstream air demands.
When pneumatic equipment begins or stops consuming air, the regulator must respond to changes in pressure and flow.
Secondary aspiration helps the regulator react quickly, supporting more stable downstream pressure during changing operating conditions.
The balanced valve construction helps reduce the effect of inlet pressure changes on regulated outlet pressure.
This design supports accurate pressure regulation and consistent performance when compressor pressure fluctuates or pneumatic equipment operates intermittently.
The Forney 75585 uses a rolling diaphragm designed to provide responsive movement and extended service life.
The diaphragm responds to changes in downstream pressure, allowing the regulating valve to adjust airflow as needed.
Its construction helps support dependable operation during repeated pressure adjustments and normal pneumatic system cycling.
The regulator is rated for a maximum inlet pressure of 250 PSIG.
This allows installation in compatible compressed-air systems operating within the specified pressure limit.
Important: The 250 PSIG specification is the maximum allowable inlet pressure, not the adjustable outlet pressure. The regulated output range is 5–150 PSI.
The regulator features 3/8-inch female National Pipe Taper connections, allowing installation with compatible male-threaded pneumatic fittings.
These connections make it suitable for use in air compressor piping, equipment supply lines, and pneumatic distribution systems.
Use fittings and thread sealants approved for compressed-air applications and follow proper installation procedures.
Forney lists this regulator as suitable for air compressors up to 10 horsepower.
This makes it useful for many workshop, automotive, agricultural, and general maintenance compressor systems.
Compressor horsepower alone does not determine compatibility. Verify the compressor's actual airflow, operating pressure, and connection requirements before installation.
The regulator includes a removable, non-rising adjustment knob.
The non-rising design provides a compact adjustment arrangement, while the removable knob allows additional flexibility for panel-mounted installations.
Removing the knob can also help discourage unauthorized pressure adjustments in applications where a consistent setting is required.
The adjustment knob design supports panel mounting, making the regulator suitable for installation in equipment panels and compressed-air control stations.
Panel mounting can help keep pressure controls organized and accessible while protecting surrounding components.
Follow the manufacturer's mounting instructions and verify clearance requirements before installation.
The Forney 75585 supports reverse flow, as identified in the manufacturer's product description.
This feature can be useful in pneumatic systems where air may need to flow backward through the regulator under appropriate operating conditions.
Reverse-flow capability should not be assumed to provide backflow prevention, pressure relief, or check-valve protection.
The regulator is designed to be easily serviced, helping simplify maintenance when inspection or component servicing becomes necessary.
Regular inspection and proper compressed-air system maintenance can help support reliable pressure regulation and extend equipment life.
Always isolate and depressurize the air supply before servicing.
The regulator has a listed maximum operating temperature of 140°F.
Install the regulator where operating temperatures remain within the manufacturer's specifications.
Avoid locations where excessive heat, direct contact with hot equipment, or other environmental conditions could damage the regulator.
The listed overall dimensions are:
These dimensions help determine installation space and mounting clearance.
Verify the regulator's orientation and allow adequate access to the adjustment knob, fittings, and service components.
For proper operation:
Do not exceed the manufacturer's specified inlet pressure, outlet pressure, or temperature limits.
Pressure Regulation: This regulator controls downstream air pressure but is not a substitute for a properly rated pressure relief valve or other required compressor safety devices.
Airflow Requirements: Confirm that the regulator's flow capacity is adequate for the combined air consumption of connected tools and equipment.
Compressed Air Only: Use for compatible pneumatic applications. Do not assume suitability for oxygen, fuel gases, breathing-air systems, hydraulic fluids, or other media without explicit manufacturer approval.
Pressure Gauge: A pressure gauge is not confirmed as included. A compatible downstream gauge may be required to accurately set and monitor regulated pressure.
Installation Safety: Never install, remove, or service the regulator while the air system is pressurized.
Additional Components: Pressure gauge, fittings, mounting hardware, and other accessories are not confirmed as included.
Forney 75585 Full-Size Air Pressure Regulator | 3/8" FNPT | Adjustable 5–150 PSI Output | 80 CFM at 215 PSI | 250 PSIG Maximum Inlet Pressure | Balanced Valve | Rolling Diaphragm | Secondary Aspiration | For Compressors Up to 10 HP.
Descripción en Español: Regulador de presión de aire Forney 75585 de tamaño completo, con conexiones hembra de 3/8 de pulgada FNPT y presión de salida ajustable de 5 a 150 PSI. Ofrece un caudal nominal de 80 CFM a 215 PSI y una presión máxima de entrada de 250 PSIG. Incorpora válvula equilibrada, aspiración secundaria y diafragma rodante para una regulación precisa y una respuesta rápida. Adecuado para compresores de aire de hasta 10 HP.
Description en Français : Régulateur de pression d'air Forney 75585, format standard, avec raccords femelles FNPT de 3/8 po et plage de pression de sortie réglable de 5 à 150 PSI. Débit nominal de 80 pi³/min à 215 PSI et pression maximale d'entrée de 250 PSIG. Doté d'une soupape équilibrée, d'une aspiration secondaire et d'une membrane déroulante pour une régulation précise et une réponse rapide. Convient aux compresseurs d'air jusqu'à 10 HP.