The Franklin Sensors ProSensor M155-2 Professional Stud Finder (FSM155-20) combines advanced multi-sensor detection technology with convenient live wire detection to deliver accurate, easy-to-read stud locations for professional contractors and homeowners. Featuring 9 precision sensors, a 9-LED display, and a dedicated stud center indicator, this electronic stud finder is designed to locate the full width of hidden wall studs, including double studs and irregular framing configurations that conventional stud finders may have difficulty identifying.
Unlike traditional stud finders that typically rely on only one or two sensors, the ProSensor M155 uses 9 precision sensors working together to detect density changes behind wall surfaces. Its LED display illuminates across the detected stud's width, allowing users to identify stud edges and center locations without repeatedly scanning from opposite directions.
The M155 also features live electrical wire detection for added safety, helping alert users to the possible presence of energized wiring behind wall surfaces. This additional feature is especially useful when preparing to install shelves, cabinets, television mounts, and other wall-mounted fixtures.
Designed for simple operation, the ProSensor M155 requires no manual calibration. Its multi-sensor technology makes it easy to begin scanning and locate hidden framing members quickly, reducing guesswork and saving time during installation projects.
Whether performing professional construction work, remodeling a room, installing storage systems, or completing everyday home improvement projects, the Franklin Sensors ProSensor M155-2 provides a practical combination of accuracy, convenience, and safety awareness.
The Franklin Sensors ProSensor M155 features 9 precision sensors designed to work together to identify density changes behind finished wall surfaces.
Traditional stud finders commonly use only one or two sensors to determine the location of a hidden stud. These tools may require repeated scanning to identify both edges before estimating the center.
The ProSensor M155 uses multiple sensors simultaneously, providing more information about the position and width of a detected object.
This multi-sensor approach is especially helpful when locating framing members that are wider than standard studs or positioned close together.
The M155 features a 9-LED display that visually indicates the location of hidden framing members.
As the tool moves across a wall, the LEDs illuminate to represent areas where the sensors detect changes in density.
Rather than providing only a single light or audible signal, the LED array helps users see the approximate width of the detected stud.
This visual feedback makes it easier to understand what is behind the wall and select an appropriate fastening location.
One of the ProSensor M155's most useful features is its ability to display the full detected width of a stud.
Traditional stud finders often require users to locate one edge, mark it, locate the opposite edge, and estimate the center.
The Franklin ProSensor's LED array simplifies this process by showing the detected stud's approximate position and width.
This can reduce the number of scans required when preparing to install wall-mounted hardware.
The ProSensor M155 includes a stud center indicator to help identify the approximate center of a detected framing member.
Locating the center of a stud is important when installing screws, lag bolts, mounting brackets, and other fasteners intended to engage structural framing.
Centering the fastener helps maximize the available material around the fastener and reduces the likelihood of drilling too close to a stud's edge.
For critical or heavy-load installations, verify the stud location and follow the mounting hardware manufacturer's instructions.
The built-in live wire detection feature provides an additional level of safety awareness when working around finished walls.
This feature is designed to help alert users to the possible presence of energized electrical wiring.
Live wire detection can be particularly useful when planning drilling locations for:
Important: Live wire detection is a supplemental warning feature. It does not guarantee that all electrical wiring will be detected.
Wires may not be detected because of depth, shielding, electrical conditions, or other factors. Never assume a location is safe to drill simply because the tool does not indicate a live wire.
Double studs are commonly found in certain structural framing locations, including around doors, windows, and load-bearing assemblies.
The M155's multi-sensor design helps identify wider or adjacent framing members.
Its LED display can provide useful information about the detected width, helping users recognize configurations that may differ from a single standard stud.
Not every wall uses standard framing spacing or conventional stud arrangements.
The ProSensor M155 is designed to help locate framing in areas with unusual configurations, such as:
Its multiple sensors help provide a more complete picture of detected density changes.
The Franklin ProSensor M155 eliminates the separate calibration step required by many conventional electronic stud finders.
Users can begin scanning without first completing a manual calibration procedure.
This simplifies operation and helps reduce setup time when checking multiple locations.
The tool's sensor array automatically responds to changes in wall density as it moves across the surface.
Locating studs accurately is an important part of many wall-mounting projects.
The ProSensor M155 helps users identify potential fastening locations behind finished wall surfaces.
Its combination of full-width detection and center indication is particularly useful when mounting items that require screws or other fasteners to be secured into framing.
Always verify that the framing and mounting hardware are suitable for the intended load.
Installing a wall-mounted television requires careful placement of the mounting bracket.
The ProSensor M155 helps locate potential stud positions so users can plan bracket placement.
The LED display provides a convenient visual reference when identifying framing members.
Follow the television mount manufacturer's instructions for fastener selection, stud engagement, and load capacity.
When installing shelves or cabinets, proper fastening into suitable wall framing can be essential.
The ProSensor M155 helps users identify stud locations before drilling.
Its stud center indicator can help with marking screw positions, while the multi-sensor display assists in recognizing wider or irregular framing.
Professional carpenters, installers, maintenance technicians, and remodeling contractors frequently need to locate hidden framing members.
The ProSensor M155 provides a practical combination of advanced sensing technology and straightforward operation.
Its LED display can reduce the need for repeated edge-finding scans, helping streamline routine installation tasks.
The M155 is also suitable for homeowners who need an easy-to-use stud finder for occasional projects.
With no separate calibration procedure and a clear LED display, users can quickly begin locating potential fastening points.
Common applications include hanging shelves, mounting televisions, installing organizers, and completing interior home improvements.
Electronic stud finders detect changes in material properties behind wall surfaces.
Although these changes commonly indicate framing members, other objects may also influence readings.
Possible sources of interference include:
For this reason, detected objects should be verified before drilling or installing fasteners.
The Franklin ProSensor M155 includes live wire detection, but it is not a substitute for proper electrical safety procedures or a dedicated electrical testing instrument.
Before drilling, cutting, or driving fasteners into a wall:
Detection performance can vary with wall construction, material thickness, electrical conditions, and other factors.
Always follow the manufacturer's operating and safety instructions.
Batteries: Inclusion and required type should be verified against the product packaging.
Manufacturer Part Number: FSM155-20
Model: ProSensor M155-2
Franklin Sensors FSM155-20 ProSensor M155-2 Professional Stud Finder | 9 Precision Sensors | 9-LED Full-Width Display | Stud Center Indicator | Live Wire Detection | Double Stud Detection | Irregular Framing Detection | No Calibration Required | Professional Electronic Wall Stud Finder.