The B&K ProLine Series 101-607 1-1/2-Inch PVC Check Valve with Slip x Slip Connections is a durable, spring-loaded, one-way flow control valve designed to help prevent reverse flow in compatible water and liquid piping systems. Featuring a white PVC body, stainless steel spring, spring-loaded poppet, and neoprene sealing components, this check valve provides automatic backflow prevention without requiring manual operation.
Designed for installation in 1-1/2-inch Schedule 40 or Schedule 80 PVC piping systems, the ProLine 101-607 features solvent-weld slip connections for secure, permanent installation. Its spring-loaded poppet automatically opens when sufficient forward flow pressure is present and closes when flow decreases or reverses, helping protect pumps, piping, and connected equipment from unwanted reverse flow.
With a listed 200 PSI pressure rating at 73°F, corrosion-resistant PVC construction, and stainless steel internal spring, this check valve is suitable for compatible liquid-handling applications within the manufacturer's operating limits. Not intended for compressed-air service.
Country of Origin: Not confirmed
Key Features / Specifications
Key Performance Advantages
Ideal For
1-1/2-Inch Slip x Slip Connections: The B&K ProLine 101-607 features 1-1/2-inch female slip sockets on both ends, allowing compatible PVC pipe to be inserted and secured using an approved PVC solvent cement system.
Schedule 40 and Schedule 80 Pipe Compatibility: The valve is designed to fit both Schedule 40 and Schedule 80 PVC pipes of the specified nominal size. Proper solvent-weld preparation and installation procedures are essential for dependable connections.
Spring-Loaded Poppet Design: The internal poppet opens when sufficient forward pressure is applied and automatically returns toward the closed position when pressure decreases or flow reverses. This helps reduce unwanted drainage and reverse flow in compatible systems.
Stainless Steel Spring: The valve incorporates a stainless steel spring that supports reliable poppet movement while providing resistance to corrosion in suitable operating environments.
Neoprene Sealing Components: Neoprene softgoods provide the sealing interface used to help prevent liquid from flowing backward through the valve. Fluid compatibility should be confirmed before use with chemicals or liquids other than water.
200 PSI Pressure Rating: The manufacturer lists a maximum pressure rating of 200 PSI at 73°F. Allowable pressure may decrease at elevated temperatures. Always verify the pressure and temperature limitations of the entire piping system before installation.
Corrosion-Resistant PVC Body: The white PVC body resists rust and corrosion, making it a practical choice for many compatible water and liquid-handling systems.
Automatic Reverse Flow Prevention: The check valve helps prevent liquid from returning toward a pump, tank, or supply line when forward flow stops. This can be useful in systems where reverse flow could interfere with equipment operation.
Pump and Water Transfer Applications: The valve may be used in compatible pump discharge or water transfer piping where one-way flow is required. Confirm that the pump can overcome the valve's opening pressure and that the valve meets the system's flow requirements.
Agricultural and Irrigation Applications: Suitable for compatible agricultural water piping and irrigation installations requiring a spring-loaded check valve. Verify the valve's suitability for the specific fluid, pressure, temperature, and installation conditions.
ASTM D2466 Solvent-End Compliance: The manufacturer identifies the solvent-weld ends as complying with ASTM D2466, a standard associated with Schedule 40 PVC plastic pipe fittings. This does not establish a separate certification for the entire valve assembly.
Installation Recommendations: Install the valve in the correct flow direction, following the directional marking on the body. Clean and prepare the pipe and valve sockets, use compatible primer and solvent cement as required, and allow the joints to cure fully before pressurizing the system.
Flow and Pressure Considerations: The spring-loaded mechanism requires sufficient forward pressure to open. Actual flow capacity, pressure drop, and cracking pressure have not been provided and should be verified for applications where these characteristics are critical.
Maintenance Recommendations: Periodically inspect the valve and surrounding piping for leakage, cracking, damage, or signs of restricted flow. If reverse flow occurs, inspect the valve according to the manufacturer's instructions for debris, seal wear, or poppet malfunction.
Important Safety Information: Do not use with compressed air or other compressed gases. PVC piping and fittings can fail dangerously when used with compressed gases. Do not exceed the manufacturer's pressure or temperature ratings. Confirm chemical compatibility and follow all applicable plumbing codes and installation requirements.
Dimensional Note: The supplied product information lists a height of 17.72 inches. Because this measurement may represent a catalog or packaging dimension rather than the installed valve length, verify the actual valve dimensions before planning a space-restricted installation.
Package Includes: (1) B&K ProLine Series 101-607 PVC Check Valve, 1-1/2" Slip x Slip, with Spring-Loaded Poppet, Stainless Steel Spring, and Neoprene Sealing Components. PVC pipe, primer, solvent cement, and additional fittings sold separately.