The Xirtec 435672 Schedule 40 PVC Reducer Bushing is a durable, corrosion-resistant plumbing fitting designed to reduce a 3-inch PVC connection to a 2-inch PVC connection in compatible Schedule 40 piping systems. Manufactured from rigid white PVC (polyvinyl chloride), this reducer bushing features a 3-inch spigot connection and a 2-inch socket connection, allowing a smaller pipe to connect to a larger fitting while maintaining a compact, secure transition. Its Schedule 40 construction, 0.216-inch listed wall thickness, and pressure rating of 260 to 280 PSI, depending on application, make it suitable for compatible pressure piping installations. Designed for use at operating temperatures up to 140°F, this reducer bushing provides a practical solution for plumbing repairs, irrigation systems, agricultural water distribution, and general PVC piping installations.
Country of Origin
Not confirmed
Key Features / Specifications
Key Performance Advantages
Ideal For
Connection Compatibility Note: The 3" spigot end is designed to insert into a compatible 3" PVC socket fitting, while the 2" socket end accepts compatible 2" nominal PVC pipe. The spigot end is not intended to slide directly over 3" pipe. Verify the mating fitting dimensions and connection requirements before installation.
Pressure Rating Note: The manufacturer-provided specifications list pressure values of 260 and 280 PSI without clearly identifying the conditions associated with each value. Actual allowable working pressure depends on the complete piping system, operating temperature, applicable standards, and the ratings of connected components. Do not assume the higher listed value applies to every installation.
Temperature Note: The listed maximum operating temperature is 140°F (60°C). PVC pressure capacity generally decreases as operating temperature increases. This fitting is not intended for applications exceeding its approved temperature or pressure limitations.
Installation Note: Use PVC primer and solvent cement approved for the pipe and fitting materials, sizes, and intended service. Clean and prepare both joining surfaces, apply the bonding products according to their manufacturers' instructions, fully seat the connections, and allow the required curing time before pressurizing the system.
Safety Note: Verify that the fitting is approved for the intended service before installation. Do not use in compressed-air or compressed-gas systems, or in applications involving incompatible chemicals, unless the manufacturer specifically approves the use.
Package Includes: (1) Xirtec 435672 Schedule 40 PVC Reducer Bushing, 3" x 2", Spigot x Socket, White.